Recessed Light Bulbs Ceiling
Recessed light bulbs – recessed ceiling lamp is a common choice in terms of lighting many homes and buildings. The basis of this type of light is embedded directly on the ceiling, instead of hanging as does a spider or a hanging light. Because bulbs recessed lights are usually hidden behind a glass globe, you must remove it to access the bulb. Remove the balloon and revamping requires only a few basic tools.
Turn off the light from the switch and placed the ladder beneath the recessed light for easy reach. Climb the stairs and look decorative finish on the bottom center of the globe. If I turn it in counterclockwise to remove it. If there is none, looking small screws at the base of the light near the ceiling. Gera each counterclockwise to loosen the globe. You may need a screwdriver to loosen the screws on some models, recessed light bulbs. Lift the globe from down gently and put it in a safe place where it cannot be broken.
12 Photos Gallery of: Recessed Light Bulbs Ceiling
Remove the existing light bulb and turn it counterclockwise and then inserts an identical, new bulb in the socket, turning clockwise. Get rid of the old recessed light bulbs. Up the balloon and place it back on the applet until it is flush against the base. Re-tighten the screws to secure the side or reinserted the decorative top and adjust. Turn the light from the switch to make sure the new light bulb works well.